Calibration Modules and Kits
Keysight Calibration Modules achieve more precise and accurate measurements for your testing needs. Regular calibration is required to ensure your high-performance measurement equipment is operating to its specified performance, and our Calibration Modules and Kits make the calibration of your equipment fast, easy, and accurate.
- Accessories
- Calibration Modules and Kits
- Adapters and Connectors
- Amplifiers
- Attenuators
- Bias Networks
- Cables, Cable Assemblies, and Leads
- Chassis and Controllers Accessories
- Comb Generators
- DC Blocks
- Detectors
- Directional Couplers & Bridges
- Frequency Meters
- Smart Harmonic Mixers
- Interface Cards, Cables, and Modules
- Interposers
- Power Dividers & Splitters
- Power Limiters
- Probes and Probe Accessories
- Racks, Rackmount Kits, and Rack Accessories
- Switches
- Test Fixtures & Test Sets
- Transition Time Converters
- Cable Assemblies
- Terminations (Loads)
- Thermocouple Kit
- Resistivity Cell For N1413 (50 Mm Electrodes)
- Resistivity Cell For N1413 (26/50 Mm Electrodes)
- Resistivity Cell For N1413 With B2980 Series (26/50/76 Mm Diameter Electrodes)
- Lithium-Ion Battery Pack, B2983 / B2987
- Extreme Temperature Active Probe, 1.5 GHz
- Accessories For RF And Microwave Handheld Analyzers
- Thermocouple (K-Type) And Temperature Probe Adapter
- Test Probe Leads, With 19-mm Tips And 4-mm Tips
- Alligator Clips
- Air Temperature Probe
- Immersion Temperature Probe
- Industrial Surface Temperature Probe
- Temperature Probe Adapter
- Soft Carrying Case, 4-5/7 In. D, Black
- Temperature Module
- Handheld Digital Multimeter, Soft Carrying Case
- IR Connectivity Bracket For U1240 Series Handheld Digital Multimeters
- Accessories For DCA Oscilloscopes Family
- 2U Dual Flange Kit
- RF Electronic Calibration Module (ECal), DC To 13.5 GHz, 4-ports
- RF Electronic Calibration Module (ECal), DC/300 KHz To 9 GHz, Type-N, 2 Port
- Thermistor Kit
- Terminal Blocks
- Economy Mechanical Calibration Kit, DC To 3 GHz, Type-F, 75 Ohm
- Spring Clip Fixture
- 110 GHz Frequency Extender
- 110 GHz Frequency Extender
- 110 GHz Frequency Extender, Pulsed DC Bias
- 110 GHz Frequency Extender, Pulsed DC Bias
- 120 GHz Frequency Extender
- 120 GHz Frequency Extender
- 120 GHz Frequency Extender
- 120 GHz Frequency Extender
- 30 A Current Shunt
-
product
7-Meter Laser Head Cable
10882B
The 10882B 7-meter Laser Head Cable is used to connect the 5519A/B Laser Head to the E1735A USB Axis Module for the 5530 Laser Calibration System.
-
product
HeNe Laser System with Built in Receiver and Power Supply
5519A
The Keysight 5519A Laser is a Helium Neon Laser (HeNe) that offers exceptional stability. The laser is a complete system with a built-in receiver and its own power supply that plugs directly into an AC power outlet.
-
product
HeNe Laser System with Built in Receiver and Power Supply
5519B
The Keysight 5519B Laser is a Helium Neon Laser (HeNe) that offers exceptional stability. The laser is a complete system with a built-in receiver and its own power supply that plugs directly into an AC power outlet.
-
product
Remote Control
10888A
The Keysight 10888A handheld wired remote provides at-a-distance initiation of Keysight 5530Laser Calibration System electronic components. The remote control provides a beam alignment meter and reset button, as well as a remote trigger.
-
product
Electronic Calibration Module (ECal), 18 GHz, 7 Mm, 2-Port
N4696D
The Keysight N4696D microwave electronic calibration (ECal) module makes calibration of Keysight vector network analyzers fast, easy, and accurate. The N4696D is a precision 2-port ECal module that supports 7-mm connectors up to 18 GHz. The plastic storage case for the N4696D is included for securing your ECal module and accessories.
-
product
Electronic Calibration Module (ECal), 26.5 GHz, 3.5 Mm, 2-port
N4691D
The Keysight N4691D microwave electronic calibration (ECal) module makes calibration of Keysight vector network analyzers fast, easy and accurate. The N4691D is a precision 2-port ECal module that supports 3.5 mm connectors up to 26.5 GHz. Select either female-female, male-male, or female-male connectors. The plastic storage case for the N4691D is included for securing your ECal module and accessories.
-
product
Ambient Temperature CalPod Module, 20 GHz
85530B
CalPods provide a new and unique way to quickly and easily refresh a network analyzer calibration, at the push of a button and without removing the DUT or re-connecting standards.
-
product
CalPod Controller
85523B
The operation of the CalPods is via VNA firmware, and the CalPod controller provides the control signals for operation of the CalPod calibration refresh modules. The CalPod controller interfaces with the PNA family and M937xA PXIe vector network analyzers.
-
product
CalPod Drive Cable Extension, 10 Meter
85554A
85554A CalPod Drive Cable (10 meter length) extends the length of CalPod control cables when the distance between the 85523B to the CalPod modules is >2 m.
-
product
Electronic Calibration Module, DC To 6.5 GHz, 2-Port
N7551A
Reduce your calibration time by half with a smaller, lighter 2-port module that supports 3.5 mm or type-N 50 Ω connectors
-
product
Electronic Calibration Module, DC To 9 GHz, 2-Port
N7552A
Reduce your calibration time by half with a smaller, lighter 2-port module that supports 3.5 mm or type-N 50 Ω connectors
-
product
Standard Mechanical Calibration Kit, DC To 7.5 GHz, 7-16
85038A
The Keysight 85038A calibration kit contains open circuits, short circuits and terminations with both male and female 7-16 connectors and has frequency coverage from dc to 7.5 GHz (usable to 8 GHz).
-
product
1 Mm Calibration Kit
85059B
The Keysight 85059B is a 1.0 mm calibration kit designed for vector network analyzer systems operating over the frequency range of DC to 120 GHz. The opens, shorts and loads in this kit are optimized to provide accurate and traceable calibrations over the specified frequency range. The 85059B with 85059V 1 mm Verification kit are replacements for the 85059A 1 mm calibration/verification kit.
-
product
3-in-1 OSL Mechanical Calibration Kit, DC To 50 GHz, 2.4 Mm (f)
85563A
Combines an open, short, and load standard in a compact unit that is easy to handle and lightweight
-
product
3-in-1 OSL Mechanical Calibration Kit, DC To 50 GHz, 2.4 Mm (m)
85564A
The 85564A 3-in-1 mechanical calibration standard combines an open, short and load standard in a compact unit. The product is small, easy to handle, and lightweight. All standards in the 85564A are male 2.4 mm.
-
product
4-In-1 OSLT Mechanical Calibration Kit, DC To 26.5 GHz, Type-3.5 Mm (m) 50 Ohm
85520A
Easily calibrate non-insertable devices with this module combining an open, short, load, and through in a compact unit.
-
product
4-in-1 OSLT Mechanical Calibration Kit, DC To 40 GHz, 2.92 Mm (f)
85561A
Combines an open, short, load, and through standard in a compact unit that is easy to handle and lightweight.
-
product
4-in-1 OSLT Mechanical Calibration Kit, DC To 40 GHz, 2.92 Mm (m)
85562A
Combines an open, short, load, and through standard in a compact unit that is easy to handle and lightweight
-
product
4-in-1 OSLT Mechanical Calibration Kit, DC To 9 GHz, Type-N(m), 50 Ohm
85514A
Easily calibrate non-insertable devices with a type-N (m) 50 Ω open, short, load, and through in a compact unit
