Filter Results By:

Products

Applications

Manufacturers

Control

Known value


Showing recent results 5926 - 5940 of 6785 products found.

  • Caibration Equipment For Lab Use

    Ponovo Power Co., Ltd.

    In the field of high-power semiconductor testing, PONOVO has launched a smart test platform with high-speed high-frequency, high-voltage, high-current power sources, combined with high-speed, high-precision high-voltage, high-current analog acquisition technology and high-speed digital processing control system. The platform can complete the testing of dynamic parameter parameters, static parameters, thermal parameters and mechanical parameters, and power life parameter of various types of high-power semiconductor devices, modules, and chips, which could meet different testing requirements. It is the universal testing platform for automated testing for different application purpose, such as the research and development testing, engineering acceptance test, factory acceptance test, etc.

  • Vehicle Communication Buses

    NI

    Vehicle Communication Buses provide native support for Controller Area Network (CAN), Local Interconnect Network (LIN), and FlexRay frames and signals. Use these products for hardware-in-the-loop simulation, bus monitoring, automation control, and more.

  • 32-way Class C SPDT Universal Switch Module

    HTLX2913 - Shaanxi Hitech Electronic Co.,Ltd.

    Haitai Electronics' general SPDT series switch products are mainly used in various test and control systems, providing distribution signal channels for high/medium/low power signals, and realizing the switching of power signals in different circuits.

  • 16-channel SPDT General Purpose Switch

    HTPXI2910 - Shaanxi Hitech Electronic Co.,Ltd.

    Haitai Electronics' general SPDT series switch products are mainly used in various test and control systems, providing distribution signal channels for high/medium/low power signals, and realizing the switching of power signals in different circuits.

  • 64-channel Class C SPDT Universal Switch Module

    HTLX2915 - Shaanxi Hitech Electronic Co.,Ltd.

    Haitai Electronics' general SPDT series switch products are mainly used in various test and control systems, providing distribution signal channels for high/medium/low power signals, and realizing the switching of power signals in different circuits.

  • 16-channel SPDT General Purpose Switch

    HTPXIe2910 - Shaanxi Hitech Electronic Co.,Ltd.

    Haitai Electronics' general SPDT series switch products are mainly used in various test and control systems, providing distribution signal channels for high/medium/low power signals, and realizing the switching of power signals in different circuits.

  • 32-way SPDT Universal Switch

    HTPXI2913 - Shaanxi Hitech Electronic Co.,Ltd.

    Haitai Electronics' general SPDT series switch products are mainly used in various test and control systems, providing distribution signal channels for high/medium/low power signals, and realizing the switching of power signals in different circuits.

  • Infrared scanner for non contact temperature measurement

    SCAN - HGH Infrared Systems

    The SCAN infrared line scanner is used for remote temperature map measurement (thermography) for process control monitoring. This fast speed infrared imaging (up to 400 lines per second) has applications in a wide range of industries.

  • Industrial 4-20mA Driver

    Analog Devices Inc.

    Analog Devices portfolio of leading industrial d/a converters and drivers addresses the challenges of enhancing system accuracy, reliability, and overall functionality while reducing form factor and power dissipation. The products provide a range of programmable output ranges from standard 4–20 mA for current loop communication to ±10 V for actuator control. They simplify industrial system design by offering considerable control functionality and advanced on-chip diagnostics to maximize system up time. ADI industrial converters also eliminate the need for costly calibration routines needed by some traditional discrete architectures.

  • 1000W, 1500W HSM Watt Power Supply Models

    Series HSM - Kepco, Inc.

    The Kepco HSM series comprises a group of ten models, seven 1000 watt power supplies with outputs from 3.3 volts to 125 volts and three 1500 watt power supplies with outputs from 24 to 125 volts. All models feature current sharing for parallel operation and redundancy applications. Kepco¹s 1000W HSM have a wide-range input (90-277V a-c). The 1500W models operate 180-277V a-c. Both incorporate power factor correction to meet EN 60555-2 and EN 61000-3-2. These modern power supplies operate at 100KHz using current mode control to provide rapid response to source and load changes and tight stabilization.

  • 16-Channel 250kSa/s USB Modular Multifunction Data Acquisition

    U2351A - Keysight Technologies

    The U2351A offers multifunction capabilities in a module. It can be used like a digital multimeter in polling mode. It can be transformed to be a simple scope using the continuous mode with simple triggering capabilities. No matter if it is used as a standalone module or when plugged into a U2781A USB modular instrument chassis, the synchronization and triggering capabilities allow great flexibility in making the desired measurements. With the analog output being able to send out predefined or arbitrary waveforms make this a good tool when closed loop feedback or stimulus is required. The digital IO channels allows for closed loop control through connections to switches, relays and solenoids. The burst mode enables the U2351A to simulate simultaneous analog input acquisition.

  • 16-Channel 500kSa/s USB Modular Multifunction Data Acquisition

    U2353A - Keysight Technologies

    The U2353A offers multifunction capabilities in a module. It can be used like a digital multimeter in polling mode. It can be transformed to be a simple scope using the continuous mode with simple triggering capabilities. No matter if it is used as a standalone module or when plugged into a U2781A USB modular instrument chassis, the synchronization and triggering capabilities allow great flexibility in making the desired measurements. With the analog output being able to send out predefined or arbitrary waveforms make this a good tool when closed loop feedback or stimulus is required. The digital IO channels allows for closed loop control through connections to switches, relays and solenoids. The burst mode enables the U2353A to simulate simultaneous analog input acquisition.

  • 17 To 19 GHz QPSK Modulator

    CCM19001 - Teledyne RF & Microwave

    The CCM19001 is a Differential Drive Digital QPSK (Quadrature Phase Shift Keying) modulator operating across the 17.0 to 19.0 GHz frequency range. The modulator utilizes differential drive digital inputs (180º apart) to drive both of the bi-phase modulators (mixers) integrated into the assembly. The modulator is a combination of a matched pair bi-phase modulators, which are in quadrature (90º) to each other. It is modulated by switching polarities of the DC voltage controls in 4 different logic states ("0,0", "0,1", "1,0" & "1,1") for 4 phase states. The QPSK modulator provides constant amplitude, 90º vector: 0 (ref.), 90º, 180º, 270º and operates across the -55º to 85º C temperature range.

  • 1-Port, CANopen Interface Device

    PCI-8531 / 781060-01 - NI

    The PCI‑8531 is a high-speed CANopen interface for developing applications with the NI‑Industrial Communications for CANopen driver. CANopen is the application layer that sits on top of the CAN physical layer often used for industrial automation … applications. CANopen was designed for motion-oriented machine control networks, such as handling systems, but now it is used in a variety of products and applications, including medical equipment, off-road vehicles, maritime electronics, public transportation, and building automation. The PCI‑8531 can transmit or receive process data objects (PDOs) and service data objects (SDOs) according to CiA‑DS 301. It also features a batch SDO editor with EDS file integration and LSS services support for slave node configuration.

  • 1‑Slot, Ethernet CompactDAQ Chassis

    cDAQ-9181 / 782052-01 - NI

    1‑Slot, Ethernet CompactDAQ Chassis - The cDAQ‑9181 is a CompactDAQ Ethernet chassis designed for small, distributed sensor measurement systems. The chassis controls the timing, synchronization, and data transfer between C Series I/O modules and an external host. You can use this … chassis with a combination of C Series I/O modules to create a mix of analog I/O, digital I/O, and counter/timer measurements. The chassis also has four 32‑bit general‑purpose counters/timers. You can access these counters through an installed, hardware‑timed digital C Series module for applications that involve quadrature encoders, PWM, event counting, pulse train generation, and period or frequency measurement.

Get Help