Filter Results By:

Products

Applications

Manufacturers

Control

Known value


Showing recent results 5521 - 5535 of 6817 products found.

  • Multifrequency Clock Synthesizer - 6U VPX

    Model 5790 - Pentek, Inc.

    - Simultaneous synthesis of up to five different clocksEight SMC clock outputs- Typical phase noise: -105 dBc/Hz @ 1 kHz offset- All clocks are phase-locked to input reference signal- Input reference frequency of 5 to 100 MHz- Four quad VCXOs allow selection from 16 different base frequencies- Output clocks of 1, 2, 4, 8, or 16 submultiples of VCXO base frequencies- Output clock frequencies between 50 and 700 MHz- Control and status over the VPX backplane

  • Multifrequency Clock Synthesizer - 6U VPX

    Model 5890 - Pentek, Inc.

    - Simultaneous synthesis of up to 10 different clocks- 16 SMC clock outputs- Typical phase noise: 105 dBc/Hz @ 1 kHz offset- All clocks are phase-locked to input reference signal- Input reference frequency of 5 to 100 MHz- Eight quad VCXOs allow selection from 16 different base frequencies- Output clocks of 1, 2, 4, 8, or 16 submultiples of VCXO base frequencies- Output clock frequencies between 50 and 700 MHz- Control and status over the VPX backplane

  • RX Family Of 32-bit High Power Efficiency MCUs

    RX200 - Renesas Electronics Corp.

    The RX200 Series offers the best mix of low power consumption and improved performance in the RX Family. It delivers max. of 80MHz CPU operation with 32KB to 1MB of embedded flash memory. RX200 Series offers a wide set of peripherals, including USB, CAN, ADC, advanced security, and IEC60730 appliance safety standard support. The RX200 Series is suitable for industrial equipment, home appliances, office equipment, healthcare products, meters, and so on. Some of the RX200 Series products are tuned for motor control solutions, too.

  • SMART HOME MANAGEMENT

    Friendly Technologies Ltd.

    Friendly's Smart Home management solution is a full solution for management and monitoring of millions of households. It enables service providers to introduce their own Smart Home Service to subscribers, offering various Smart Home service packages. Friendly's Smart Home Management platform provides subscribers with a coherent and holistic view and control of all devices in their Smart Home: from appliances and security sensors, to cameras and power management, including camera view, recording sensors status, alarms upon events, automated scenarios and more.

  • KVM Over IP

    TV One

    The ultimate zero latency, scalable, 4K60 solution. Pathfinder provides a zero latency, 4K KVM extension and switching solution. Extend 4K and HD sources via CAT or Fiber cable to create flexible, wide reaching KVM over IP matrixing solutions. Highly scalable, with up to 3,000+ high-quality endpoints in a single system, it’s the perfect solution for mission critical control and collaboration. Pathfinder offers plug and play set up with no configuration of endpoints required, nor any costly user licensing fees.

  • CMOS Type Micro Laser Distance Sensor

    HG-C1000L - Panasonic Industrial Devices Sales Company of America

    The IO-Link technology makes it possible to continuously collect and process data and to control the HG-C1000L. This allows users to implement predictive maintenance and to monitor the operation in machines and assembly lines. Processing the multitude of data requires users to invest know-how and time. To reduce the workload for the customers, Panasonic has developed a self-diagnosis function specifically for this sensor. This function sends sensor data via IO-Link to a higher-level fieldbus, thus informing about the state of the sensor directly. This way, the amount of production data and the work needed to analyze the data is reduced.

  • Digital Fiber Sensor

    FX-550L - Panasonic Industrial Devices Sales Company of America

    Panasonic IO-Link technology makes it possible to continuously collect and process data and to control the sensor. This allows users to implement predictive maintenance and to monitor operation in machines and assembly lines. Processing the multitude of data requires users to invest in know-how and time. Panasonic has developed a self-diagnosis function for each sensor type. This function sends sensor data via IO-Link to a higher-level fieldbus, thus informing about the state of the sensor directly. This way, the amount of production data and the work needed to analyze the data is reduced.

  • Solvent Resistance Tester

    NRJ-100 - Shanghai Dean Electrical Co., Ltd

    Executive standard: GB/T4074.4-2008/IEC60851-4; Inspection standard: JB/T4279.10-2008Used to detect the solvent resistance performance of enameled round wires and flat wires with nominal conductor diameter above 0.250mm;Application of SCM control allows for fast operation and strong anti-interference capacity;Pencil push unit would automatically lay down pencil and move ahead, lift pencil and automatically return to initial position;Used in combination with JRK-60 solvent thermostatic controller;Automatic pencil sharper can sharpen pencil tip to be 60° symmetrical to its axis;

  • High Temperature Chip Resistors

    ERJ-Hxx Series - Panasonic Industrial Devices Sales Company of America

    Panasonic’s ERJ-Hxx Series Automotive Grade Thick Film Chip Resistors feature a maximum Category Temperature of 175°C and a maximum Rated Operating Temperature of 105°C. The ERJ-Hxx Series is AEC-Q200 compliant, ensuring strict quality control standards are in place to enforce optimal quality and reliability. The ERJ-Hxx Series Resistors offer a small size, higher power Resistor alternative that provides enhanced flexibility of PCB design by reducing solder-joint crack risk. This series is ideal for use in automotive, ICT, general industrial applications, and more.

  • Low-noise High-voltage Amplifier For Tube-scanners -

    HV200/5 - Anfatec Instruments AG

    The HV200/5 is a high-precision HV-amplifier designed for the control of tube scanners. It takes three input voltages In X, In Y and In Z (-10 V to + 10 V), amplifies them separately (input gain switches: x1, x2, x5, x10, x20) and adds an offset voltage between -10 V and +10 V. In a 2nd stage, the signal is amplified by a factor of 20. This enables its use as HV amplifier in scanning image acquisition applications, such as STM or AFM, with the capability to shift the scan range in high resolution imaging.

  • Flat Carbon Sensor Conductivity meter

    HE-960LF / FS-09F-1/2 - HORIBA, Ltd.

    It is effective to keep the dilution of Slurry constant. Maintaining an appropriate conductivity value contributes to process stability in the wafer polishing process. Even highly viscous sample liquids such as CMP Slurry can be measured without problems because they use a sensor structure that reduces the risk of the sample liquid sticking to the electrodes. In addition, the sensor is made of a wetted material with excellent chemical resistance, which meets the cleanliness requirements of semiconductor processes. In addition to the above, it can also be used for introduction at the semiconductor process development stage and conductivity control of special chemicals.

  • Oxygen/Nitrogen/Hydrogen Analyzers

    EMGA-Expert - HORIBA, Ltd.

    The characteristics and performance of metal and solid materials, including steel, various other metals, ceramics, and electronic materials, are determined by the amount of oxygen, nitrogen, and hydrogen. Analyzing elements in such materials at high accuracy and with a small amount has become increasingly important in the study and performance analysis of materials.The EMGA Series Oxygen/Nitrogen/Hydrogen Analyzers significantly reduces analysis time and costs while enhancing analysis accuracy and functionality. Pursuing also usability, the EMGA Series strongly supports improved efficiency in material research and development and quality control.

  • Oxygen/Nitrogen/Hydrogen Analyzers

    EMGA-Pro - HORIBA, Ltd.

    The characteristics and performance of metal and solid materials, including steel, various other metals, ceramics, and electronic materials, are determined by the amount of oxygen, nitrogen, and hydrogen. Analyzing elements in such materials at high accuracy and with a small amount has become increasingly important in the study and performance analysis of materials. The EMGA Series Oxygen/Nitrogen/Hydrogen Analyzers significantly reduces analysis time and costs while enhancing analysis accuracy and functionality. Pursuing also usability, the EMGA Series strongly supports improved efficiency in material research and development and quality control.

  • Venturi Flow Measurement Trainer (UITM-22)

    Unitech Scales And Measurements Pvt. Ltd

    UNITECHS venturi flow measurement trainer comprises of an Venturi meter fitted between the piping. A small FHP pump is used to circulate the water through the piping. Pressure ports brought out from the Venturi meter are connected to a U tube mercury manometer to measure the pressure difference. Collecting tank of capacity 5 liter is provided with graduations to measure water level. Digital timer is fixed to calculate the flow rate. Flow can be controlled using a manual control valve. The complete setup is mounted on a table top model.

  • CONTROLLING THE MACHINING PROCESS

    ESPI sarl

    In the Wolrd where it is possible to produce a complex part in few minutes, is it sitll acceptable to wait several dozen of minutes or even hours to get measuring results used to set-up the machine-tool? Facing the increase of machine-tool complexity, how to simplify the tool wear compensation process to reduce the changeover time? With Dynamic Process Control (DPC), ESPI brings the relevant answer to these questions by offering Scanflash, an ultra-fast measuring machine and Tools’Driver, an automatic tool wear compensation software allowing to quickly set-up the machine tool.

Get Help