Filter Results By:





Known value

Showing product results. 5236 - 5250 of 7040 products found.

  • 8-Channel ADC Module

    FMC108 - Sundance Multiprocessor Technology Ltd.

    The FMC108 is an eight-channel ADC FMC (FPGA Mezzanine Card) which is fully compliant with the VITA 57.1-2010 standard. The FMC108 card provides eight A/D 14-bit 250MSPS channels which can be sampled by an internal clock source (optionally locked to an external reference) or an externally supplied sample clock. A trigger input for customized sampling control is also available. The FMC108 has the HPC (high-pin count) connector, front panel I/O, and is conduction cooled compliant. The board is also available with Mil-I-46058c compliant Conformal Coating.

  • 8-Channel ADC Module

    FMC168 – LPC - Sundance Multiprocessor Technology Ltd.

    The FMC168 is a digitizer FMC featuring eight ADC channels with 16-bit resolution and 250 Mega samples per second sampling rate per channel. With a flexible clock generation and distribution scheme, the FMC168 allows control on sampling frequency and analog input gain through serial communication with a carrier card. The FMC168 design is based on the TI ADS42LB69 Dual Channel 16-Bit 250 MSPS A/D, is equipped with power supply and temperature monitoring, and offers several power-down modes to switch off unused functions.

  • ADC Drivers Fully Differential Amplifiers

    Analog Devices Inc.

    Differential amplifiers allow the process of single-ended input to complementary differential outputs or differential inputs to differential outputs. These amplifiers feature two separate feedback loops to control the differential and common-mode output voltages. Analog Devices fully differential amplifiers are configured with a VOCM pin, which can be easily adjusted for setting output common-mode voltage. This provides a convenient solution when interfacing with analog-to-digital converters (ADCs). ADI also offers a series of differential receiver products that convert differential input signals to single ended output.

  • Air Data

    Mensor Corp.

    Testing altitude and airspeed components in commercial and military air data applications are critical for the safety and performance of an aircraft. Mensor air data test set and indicators provide the high accuracy necessary for these applications. Air Data Test Sets control altitude /altitude rate and airspeed /airspeed rate, for testing altimeters and airspeed indicators or air data computers in a dynamic way that simulates actual flying conditions. Air data Indicators measure Altitude /Altitude Rate and Airspeed /Airspeed Rate for applications where conditions are externally controlled.

  • Air Quality Analysis

    Thermo Fisher Scientific Inc.

    Ambient Gas Monitoring: We offer a variety of analyzers for the ambient monitoring of the criteria pollutant gases, including CO, NOX, SO2, and others such as CH4 and CO2. Source Gas Monitoring (Emissions Monitoring): Experience reliable measurement in your process for emissions compliance every time.Ambient Particulate Monitoring: Experience our monitoring technology and gain the power to do more than just inform.Emissions Calibrators: For continuous monitoring of mercury in exhaust stacks, waste incinerators, and cement kilns, or multi-gas models to control the calibration of gas concentrations.

  • Amplifiers

    TOA Electronics, Inc.

    Amplifier is designed to be used in conjunction with optional modules and can be confiugured for up to 8 inputs and 8 outputs. 9000 series modules as well as existing 900 series input modules can be used. The more appropriate modules can be selected depending on applications. Since it comes with two 60W power amplifiers, it can individually perform multi-origin braodcasts. It is equipped with singnal processing and control functions necessary for sound reinforcement, permitting all parameters to be set at the mixer. Settings data can be stored inside the unit and called up using the keys on the front panel.

  • Analog Sequencers

    Analog Devices Inc.

    Analog sequencers from Analog Devices integrate accurate comparators with the control functionality of power-on and power-down sequencing for voltage regulator banks. The comparators monitor the regulator voltage outputs and trigger the turn on of next rail in the system after a preconfigured time delay. Some members of this portfolio can be cascaded together, which provides scalable solutions to expand functionality across multiple devices. Our analog sequencers provide an easy to use solution for power sequencing challenges in cellular infrastructure, telecommunication, data communication, and data center applications.

  • Angular Protractors

    IAC90 - D.Marchiori s.r.l.

    D.Marchiori (DMA) manufacture electromechanical devices to measure the relative rotation between movable surfaces which are used by the aircraft industry for aircraft control surface analysis.Angular position is measured by a goniometric scale and/or by an angular position sensor with 0.01 deg. resolution. Angular protractors can be supplied with two types of fixing plates: the screw-type plate and the suction-type plate. A special bearing on the mounting and a cylindrical hinge allows the protractor to check the relative rotation between movable surfaces having a transversal misalignment of 0.8 inch (20 mm) max.

  • Application Lifecycle Management

    VeroTrace - Verocel, Inc.

    The VeroTrace tool provides a complete end-to-end life cycle verification management environment that allows full configuration control, traceability and review tracking for software development. It maintains all development and verification life cycle artifacts for your software application, as well as their relationships and review status. It is the ideal environment to handle development, review, authorization and sign-off status of complex software systems. VeroTrace is ideal for software that requires some form of regulatory approval and has features and capabilities that are superior to competitive ALM products

  • Arc Ingintion Tester


    The product is designed to carry out Arc Ignition Test as per IS/IEC 60947-1 Clause (material used for electrical products). The adjustable current source is 230V AC @ 33A. The load is adjusted to get 32.5A at 0.5 power factor. Included on control unit are Digital Voltmeter, Digital Ammeter, Digital Power Factor Meter and Micro Controller based programmable Sequence Timer with LCD display for display & setting. The arrangement is made to mount the test piece with electrodes as per the specification given in the standard.

  • Atomic Spectroscopy Data Systems

    Agilent Technologies

    Agilent’s comprehensive atomic spectroscopy software portfolio leads the industry in the simple setup and productivity tools required by routine analytical laboratories, while also providing the flexibility needed for advanced method development in research and academia. Our advanced ICP-MS software, including the powerful ChemStation and MassHunter systems, are used in all of our mass-spec platforms, so you can benefit from a single solution and reduce staff training requirements. Our cutting edge ICP software also enables intuitive control in ICP-MS processes.

  • ATOS ScanBox

    Series 7 - GOM GmbH

    The ATOS ScanBox Series 7 is mainly used in car manufacturing, in try-out toolmaking and in press shops. The optical 3D measuring system performs complete analysis measurements for comparison in the introductory phase or is used for quality control in production. Large parts such as automobile side panels and attached parts of up to 6 m in size can be measured. The full- field measuring data enable the analysis of hole pattern, trimming and character lines. Even heavy and large parts for other applications can be measured and inspected with the ATOS ScanBox Series 7.

  • Audio Meter and Side Chaining Tool

    Digital Peak Meter Pro - Blue Cat Audio

    The metering capabilities of the DPMP plug-in let you control and monitor your audio signal exactly the way you want: almost every aspect of the meters can be customized. It now proposes five different scales, including Bob Katz's very popular K-System scales (K-12, K-14, K-16 and also the extra K-10). The graphs show the evolution of the audio envelopes over time, and the mid-side switch lets you verify mono compatibility problems and check the "stereoness" of your audio sources very easily.

  • Automation Services


    Yastronics has a group of dedicated and experienced professional engineers in this division. This division carryout the work to automate various production plants to PLC control system-designed for your specific and modern technology of this century. In Saudi Arabia, we can announce honestly that our team of specialists has automated most of the Ready-mix Concrete plants as well as Asphalt plants. Also some of the old model heavy mechanical machine units, water treatment plants, also small or big plants to the entire satisfaction of our clients in a highly professional way.

  • Automotive Ethernet Interface Device


    The Automotive Ethernet Interface Device converts unshielded twisted pair (UTP) Automotive Ethernet to standard Ethernet. This device is ideal for developing applications that require Automotive Ethernet to test and validate automotive electronic control units (ECUs). It includes ports for Automotive Ethernet connections and ports for 100BASE-TX Ethernet connections. You can use switches on the front panel to configure each 100BASE-T1 port as master or slave. The device also provides LED on the front panel so that you can monitor the linkage and activity on the various ports.

Get Help