Filter Results By:





Known value

Showing product results. 4576 - 4590 of 6996 products found.

  • Fiber Optical Monitor System

    PON FOMA - Radiantech, Inc.

    PON FOMA ( PON Fiber Optical Monitoring Alarm System) is integrated RTU ( Remote Test Unit )、Center Monitoring Server and its management software to be integrated operation、remote control、periodic fiber scan、predictive analysis and support the instant fiber with status information and alarm warning, accurate of long-term fiber data record, fiber analysis and management. RTU monitoring station is embedded Linux system which is with the advantage of high security, stability, efficiency.

  • Field thermal needle system for thermal resistivity / conductivity measurement

    FTN01 - Hukseflux Thermal Sensors B.V.

    The FTN01 Field Thermal Needle System allows performing fast, on-site measurements of the thermal resistivity or conductivity of soils, in particular around the typical depth of burial of high voltage cables. FTN01 is designed with a focus on robustness and saving time, while still offering sufficient accuracy for typical field measurements. The sensor is a Non-Steady-State Probe (NSSP), TP09, which is mounted at the tip of the Lance LN01. The system is operated using a hand-held Control and Readout Unit CRU01.

  • Film Frame Test Handler

    4170-IH - TESEC, INC

    High throughput ・High withstand load, and high thrust table ・Expansion of the strip attachment area :260(L) X 300(W) [Withinφ300mm for WLCSP]・LOT control by barcode/2D code reader ・Easy device type exchange only test socket and display screen setting・Auto-cleaning function unit is installed to clean the socket at any desired timing.・8/12 inches ring conversion ・S2/S8 regulation compliance・SEMI G85 compliance・SECS/GEM compliance

  • Frame Grabbers

    Domino Series - Euresys Inc.

    The Domino series is a range of high-end PCI and PCI Express frame grabbers for analog cameras. They support any system function associated to industrial acquisition, such as camera asynchronous reset, exposure and strobe control. The latest Domino boards - Melody, Harmony and Symphony PCIe - are based on an innovative proprietary technology called D Technology*. It provides a perfect digital image with the benefits of a proven analog environment: low-cost, reliable cabling and connections, smallest cameras, low power,

  • General Purpose Surface Temperature Assembly

    S2-2 - Dwyer Instruments Inc.

    The Series S2-2 General Purpose Surface Temperature Assembly is ideal for monitoring the temperature of indoor distribution lines when it is not possible to penetrate the pipe. The plastic housing is in the shape of a standard junction box with multiple knockouts for easy conduit access. The strap-on connection quickly wraps around a pipe and can be securely tightened using a flat head screw driver. The Series S2-2 can be ordered with a choice of 11 output options that allow it to communicate to any standard building control system

  • Generic RF ATE Test

    Data Patterns Pvt. Ltd.

    The Generic RF ATE is developed to test the Radar and Radar Subsystems. The ATE is primarily built using an instrumentation control, precision RF routing systems and rack mounted test instruments. Generic RF ATE system enables measurement of parameters of Radar equipment such as Local Oscillators, Waveform Generators, Up and Down Converters, Analog Receivers, Array Group Receiver Units, TR Modules. The ATE is configured to test the Radars upto 18GHz frequency range.

  • Gyroscopes

    Analog Devices Inc.

    Analog Devices MEMS gyroscopes and iSensor® MEMS gyroscope subsystems reliably sense and measure the angular rate of an object under complex and severe operating conditions. Our MEMS gyroscope portfolio includes analog and digital output, high vibration and shock immunity, and temperature sensitivity control to 25 ppm/°C. Measure an object’s rotation in °/sec over a wide dynamic range and bandwidth while leveraging our expertise to jumpstart your next design.

  • Hall Effect Measurement system

    HMS-3300 - ECOPIA

    Magnetic flux density : 0.55Tesla (+/-0.03T)Gap distance between both round magnets : 26mm / Round magnet diameter : 50mmMeasurable temp : RT ~ 300℃(model# HT55T3). Resolution : 0.1℃(Model# HT55T5 : RT ~ 500℃)Both HT55T3 and HT55T5 are only capable of using with HMS-3000 main body.(Not compatible with HMS-5000 )- You can flow purge gas into small chamber and measure hall effect at the same time. Gas control valve can be installed as an option.

  • Hydrostatic Level Sensor

    2250 - Georg Fischer Signet

    The Signet 2250 Hydrostatic Level Sensor for level and depth control has a one-piece injection-molded PVDF body and ceramic diaphragm for superior compatibility in corrosive liquids. Utilizing hydrostatic pressure, the 2250 Level Sensor disregards false level signals from steam vapors, foam or any other debris on the liquid surface. Two pressure ranges allow for optimal resolution matched to your sensing needs. Solid state circuitry eliminates drift (no internal potentiometers).

  • Hygrocontrol Hygrometer

    Type 85 - Cosa Xentaur Corp.

    Relative humidity and temperature meter (hygrometer) for industrial useThe drawn current (4-20mA) responds to measured humidity 0-100% RHThe instrument uses a capacitance type sensing element with polymer dielectric medium.The temperature sensor is a Pt-1000 Ohm RTD. Microprocessor control allows for multipoint calibrationA maximum accuracy of 1.5 %RH is achieved with 8 pointsBuilt in special temperature compensation is to correct humidity values from deviations arising from temperature effects on the sensor and the electronics

  • Industrial PC

    Omron Industrial Automation

    Hybrid controller which combines Sysmac machine control and IT technology*Intel Core i7 Quad-core processor*Windows Embedded Standard 7 64-bit*Open operating system allows running customised software and hardware*Built-in EtherNet/IP port for your IT systems and machine to machine communication*Sysmac machine controller inside*500 μs system cycle time*Up to 64 synchronized axes*Built-in EtherCAT port for up to 192 synchronized slaves

  • Industry Pack Carriers and Digital I/O

    CPCI-4pack-6U - ALPHI Technology

    The CPCI-4pack-6U module provides a high performanceflexible I/O scheme, that supports industry standard IndustryPacksÔ. For application requiring low cost, high density I/Oor unique combinations, the CPCI-4pack-6U is the perfectsolution. The Local DSP can be used to simply move data toand from the CPCI bus or provide pre processing functionssuch as local PID controls, FFT’s, digital filtering, etc.Custom application software can be downloaded to the DSPvia the CPCI bus or the local serial port.

  • IVI Driver Package

    IVI Development - Pacific MindWorks Inc.

    The most complete IVI driver package from the most trusted name in IVI. Driver development can be tedious and distracting when you are scrambling to meet product deadlines. Researching the latest IVI standards, lack of driver documentation, and changing firmware all work against your product deadline. As a result, quality control over your product or driver or both can suffer. With IVI Development services from Pacific MindWorks you are free to focus on your product.

  • LA-LIBS Instrument

    J200 Tandem - Applied Spectra, Inc.

    Some of the highlights of the J200 Tandem instrument include an option for a compact, modular design, auto sampling height adjustment for uneven sample surfaces, sample chamber optimization for LA measurements, high precision gas flow control, and a dual camera sample visualization system. Additionally, the J200’s design allows for the configuration of three different LIBS detectors, with a multiple detector option, opening up a wide range of analytical applications in the standalone LIBS mode of the instrument.

  • LCZ LCR Meter

    SS1063 - Sanshine Electronis Co., Ltd.

    This (SS1061 / SS1062 / SS1063) LCZ Meters are a test system for passive components designed for the use in electronic inspection or production process for quality control. They meet any demanding requirement on production speed and precision, discrimination of qualified products from unqualified ones, as well as internal setup, storing and calling function for up to 10 instrument groups, so they Like as: transformer, inductor, resistor, capacitor, relay, motor, generator, eletric valve, contactor,cable,wire,etc.

Get Help