Filter Results By:

Products

Applications

Manufacturers

Control

Known value


Showing product results. 4486 - 4500 of 6882 products found.

  • IP Reuse

    IC Manage, Inc.

    IC Manage Global Design Platform (GDP & GDP-XL) includes an open platform for maximizing IP reuse. Design and verification teams can use the system to rapidly publish and integrate IP into existing flows, and to trace bug dependencies. Internal and third party IP can be imported or linked with IP Central from multiple commercial and open source design management systems, as well as internal revision control systems. ”

  • 16-Channel, ±30 VDC, 8 Sink/Source Inputs, 8 Relay Outputs (150 V), Isolated Digital I/O Device

    PCI-6521 / 779312-01 - NI

    The PCI-6521 is an industrial digital I/O module with high channel isolation and industry-standard 24 V logic levels. If a computer or application fault occurs, the PCI-6521 can use … digital I/O watchdogs to switch to a configurable safe output state to ensure detection and safe recovery from fault conditions. It also features programmable power-up states, digital filtering, and change detection for optimal control over your application.

  • 1.33 GHz Dual-Core CPU, 2 GB DRAM, 4 GB Storage, -40 °C to 70 °C, Artix-7 A100T FPGA, Extended Temperature, 4-Slot CompactRIO Controller

    cRIO-9055 / 787043-01 - NI

    1.33 GHz Dual-Core CPU, 2 GB DRAM, 4 GB Storage, -40 °C to 70 °C, Artix-7 A100T FPGA, Extended Temperature, 4-Slot CompactRIO Controller - The cRIO-9055 is a rugged, deployable controller for data acquisition and control applications. It offers Intel Atom dual-core processing, an … Artix-7 FPGA, and four slots for C Series modules. It runs the NI Linux Real-Time operating system with access to the I/O through NI-DAQmx drivers or with the LabVIEW FPGA module. The controller provides precise, synchronized timing and deterministic communications over the network using TSN, ideal for distributed measurements and control. This controller offers two Gigabit Ethernet ports, one USB 3.1 host port, one USB 2.0 device port, a trigger line, and a μSD card slot for storing data locally. The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a worldwide basis.

  • 1.33 GHz Dual-Core CPU, 2 GB DRAM, 4 GB Storage, -40 °C to 70 °C, Artix-7 A100T FPGA, Extended Temperature, 4-Slot CompactRIO Controller

    cRIO-9055 / 787879-01 - NI

    1.33 GHz Dual-Core CPU, 2 GB DRAM, 4 GB Storage, -40 °C to 70 °C, Artix-7 A100T FPGA, Extended Temperature, 4-Slot CompactRIO Controller - The cRIO-9055 is a rugged, deployable controller for data acquisition and control applications. It offers Intel Atom dual-core processing, an … Artix-7 FPGA, and four slots for C Series modules. It runs the NI Linux Real-Time operating system with access to the I/O through NI-DAQmx drivers or with the LabVIEW FPGA module. The controller provides precise, synchronized timing and deterministic communications over the network using TSN, ideal for distributed measurements and control. This controller offers two Gigabit Ethernet ports, one USB 3.1 host port, one USB 2.0 device port, a trigger line, and a μSD card slot for storing data locally. The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a worldwide basis.

  • 150W, DC System Power Supplies, GPIB, Modular Outputs

    Keysight Technologies

    Meet changing requirements in ATE and production test with up to eight easily swappable modules per mainframe. The modular design conserves rack space and simplifies system cabling and assembly. Modular system permits up to 8 outputs of 150W per output in 4U of rack space Simplify reconfiguration, calibration, or repair with modules that remove from the front without disconnecting DUT wiring GPIB interface with SCPI command set, drivers available Serial link system enables control of multiple power supplies from one GPIB address Simplify system cabling when isolation or reverse voltage is needed using optional built-in open/close/polarity reversal relays Advanced hardware and software triggering system to allow synchronization to other events in your ATE system Simplify cabling with built-in measurements Streamline tasks with optional keyboard for manual control and advanced programmable features including automated sequencing of up to 20 output setting steps Ensure DUT safety with protection features

  • Compact PowerSync Analyzer

    PSA-3402 - Sifos Technologies, Inc.

    Sifos Technologies offers the PowerSync® Analyzer Compact PSA-3402 supporting the world’s most comprehensive and automated PSE Conformance Test Suites covering PSE’s that power up to 30W on 2-pairs and up to 90W on 4-pairs. Compact and transportable configuration supporting PSE Conformance Test Suite and LLDP Emulation and Analysis options. Key Features:• Continuous 2-Pair Loading > 47 Watts Per PSE Port• Continuous 4-Pair Loading > 99 Watts Per PSE Port• Industry Leading IEEE 802.3 PSE Conformance Tests• Unique, Fully Automated Multi-Port PSE System Analysis for 802.3at• Flexible 802.3at & 802.3bt Powered Device Emulation​• One-Click 2-Pair and 4-Pair PSE Waveform Analysis• Flexible PoE LLDP Emulation and LLDP Protocol Analysis• Flexible and Accurate Measurements of Voltage and Current• Noise Immune Triggering and Flexible Load Transients• Ethernet 10/100 Control Interface• Smart Fan Control – Runs Cool and Quiet​• Comprehensive Safety and RF Certifications​

  • Digital Pulse Output

    ATP Series - Automation Components Inc.

    ATP-R converts an analog signal into a digital pulse output signal. The user can select eight standard analog input ranges to the ATP by changing jumper shunt positions. To select the output pulse range, the ATP has an eight position DIP switch. The output pulse is continuous with a one second off between pulses. ATP-R Version 2 operates the same except no pulse output occurs when the analog input falls to, or below 10% of the input signal range. This allows for a true "OFF" setting for solid state relays controlling electric heat. The ATP-T is a Triac Output (24VAC only). You need to contact ACIfor technical asistance when ordering. ATP-Y is a also a Form C Relay Output (24VAC or VDC) with an option of two pulse ouput ranges designed to communicate with York(TM) Chiller Control Packages. Some chiller control panels require a 1-11 or 0-21 second pulse to remotely reset chilled water temperatures.

  • LED Power Driver ATS

    8491 - Chroma ATE Inc.

    1. DC Electronic Load : Chroma 6310A/6330A Series2. Transducer Unit/Module*1 : Chroma A849101/A849102, A849103, A8491043. Time/Noise Analyzer : Chroma 80611 & 80611N card4. Sytem Controller*2 : Industrial PC5. DC Source: Chroma 62000P Series6. Digital Power Meter : Chroma 66200 Series7. OVP/Short Circuit Tester : Chroma 806128. ON/OFF Controller : Chroma 80613*1 : A849101 transfers UUT output signal to voltage signal, and measure by 84911 LED power driver measurement card (200kHz). The optional 80611N Noise card is required for 20MHz ripplecurrent measurement.*2 : The controller includes both 84911 LED Power Driver measurement card and 84903 control card.- 84911: Measure rms current, dimming current/frequency/duty, timing, power & ripple current (200kHz)- 84903 : Provide BL control signal(DC level, PWM, SM bus), and enable ON/OFF signal.C Source : Chroma 6500/61500/61600 Series

  • Modular DC Power Supply

    62000B series - Chroma ATE Inc.

    Chroma's new 62000B series of Modular DC Power Supplies offer many unique features for Burn-in and plating/electrolysis applications. The features include a N+1 redundancy, high power densities, hot-swappable maintenance, remote ON/OFF and programmable control via the CAN bus. The 62000B family offers 5 types of power module with ranging from 1V to 150V, current from 10A to 90A, and offers two mainframe type of six and three position. The six position mainframe can envelop in up to six power modules paralleled operation for 9KW power output. The 62000B can easily parallel up to fourteen mainframe to 120KW with current sharing and CAN bus control for bulk power applications. The Modular DC Power Supplies of 62000B are very cost effective with high power density and low current ripple. These instruments have be designed for burn-in applications such as the LCD panels, DC-DC converters, power inverters, notebook computers, battery chargers and many other types of electronic devices.

  • PowerSync Analyzer

    PSA-3000 - Sifos Technologies, Inc.

    Sifos Technologies offers the PowerSync® Analyzer PSA-3000 multi-slot chassis support the world’s most comprehensive and automated PSE Conformance Test Suites covering PSE’s that power up to 30W on 2-pairs and up to 90W on 4-pairs. Connects up to 24x PSE ports and provides access to the PSE Conformance Test Suite, the Multi-Port Suite, and LLDP Emulation and Analysis.Key Features• Continuous 2-Pair Loading > 47 Watts Per PSE Port• Continuous 4-Pair Loading > 99 Watts Per PSE Port• Industry Leading IEEE 802.3 PSE Conformance Tests• Unique, Fully Automated Multi-Port PSE System Analysis for 802.3at• Flexible 802.3at & 802.3bt Powered Device Emulation​• One-Click 2-Pair and 4-Pair PSE Waveform Analysis• Flexible PoE LLDP Emulation and LLDP Protocol Analysis• Flexible and Accurate Measurements of Voltage and Current• Noise Immune Triggering and Flexible Load Transients• Ethernet 10/100 Control Interface• Smart Fan Control – Runs Cool and Quiet​• Comprehensive Safety and RF Certifications​

  • Programmable DC Electronic Load - (Economical)

    63200E Series - Chroma ATE Inc.

    The 63200E series are high power DC loads that include a choice of three operating voltages, 150V, 600V and 1,200V, with power levels from 2kW to 24kW and up to 2,000A in a single unit. Power levels can increase up to 240kW when multiple units are paralleled.These high power loads are designed for testing a wide range of EV products including DC charging stations, car battery discharge, on board charger power components, and other power electronics components. With its high power capabilities, parallel control and dynamic synchronization functions make this load ideal for automotive batteries, fuel cells and more. The 63200E load's master/slave control application enables units with the samevoltage specification to be used in parallel and synchronized dynamically to meet the power testing requirements. In addition, a 255-set data storage function has been built-in for recall of the stored settings at any time. When used in automated testing, the save and recall functions can save a great deal of time.

  • Remote Monitor Management Information Base

    SNMP RMON MIB - InterWorking Labs, Inc.

    For every control table in the MIB, create and delete rows with various combinations of SNMP requests (all variables in a single request throughall variables in individual requests).Determine which row of this table is modeling the ethernet interface connected to the agent (requires that we are using ethernet). Check that this is for the same interface discovered in the "interfaces" test. Check counters.Build a history control row pointing to the interface connected to the agent. Check validity and traffic reported.Test agent's ability to generate an alarm on an RMON variable, then on threshold condition. Test for support of alarms on failing events, and in the event of target variable vanishing.Set up agent to track hosts on the ethernet interface connected to the agent. Check that entry was added for Rmon device's own ethernet address.Generate various top N reports (hostTopN test) and check validity.Start a matrix capture and check that the src-dst and dst-src tables are in sync.Check a channel and check for event generation (filter test).Create a channel and start a capture. Test locking and wrapWhenFull operation.

  • RF Communications Test System

    KT-RFCT 2400A - Konrad Technologies GmbH

    The Konrad RFCT 2400A is an RF communications test system with the perfect price to performance capabilities. The low price point creates a cost-effective means for testing wireless communication units, while generating a favorable cost to performance ratio. Based on a software defined radio (SDR) approach, the instrument can be adapted to upcoming standards for non-signaling tests and gives the customer full control over signal evaluation. The KT-RFCT 2400A is the perfect test system for a wide range of applications, such as Bluetooth, Infotainment, Keyless Entry, Tire Pressure Measurement, GPS, WIFI and more. The calibrated test system has a small footprint, integrating seamlessly into test system infrastructures via a single Ethernet connection. GPIOs control the DUT and peripherals. The test system enables communication interfaces like SPI, I2C, UART and CAN. Simple Go/No-Go tests can be performed in parallel. The KT-RFCT 2400A features a 70 MHz - 6 GHz frequency range and includes non-signaling and signaling connections.

  • RF One Power Meter

    COMM-connect

    The RF One Power Meter is a very versatile instrument covering both analog and digital carriers in an extremely wide frequency range from 30MHz to 6GHz. The RF One is capable of measuring forward and reflected power in the range of a few milliwatts up to 500 Watts. The internal operating system controls measurement, display and the I/Os allowing serial communication to PC, USB to memory stick and USB Serial communication. The I/O options are used to write plots to either memory sticks or to a connected PC, the I/Os can also be used to operate the instrument, giving commands and receiving data. For documentation reference the instrument has a real time clock. Multilayer menus are used to setup and control the operation of parameters. The RF One instrument is small, handy and light weight battery operated with more than 3 hours of continuous operation on the internal NiMh cells. Feature with XML data handling and application viewer is included. Accessory kit with soft carrying bag, car charger and coax adapters for standard types.

  • Smart Variable-switching DC Power Supply

    PAV Series - Kikusui Electronics Corp.

    The PAV series is a compact, high power density, high performance constant voltage (CV) / constant current (CC) variable switching power supply. The PAV consists of 64 models total*1 with 4 types of maximum power outputs at 200 W, 400 W, 600 W and 800 W and output voltages from 10 V through 650 V. All models are standardized to a same size with 2U high (approximately 88 mm) and have high power density for bench-top use. The PAV series allows sequence settings with an embedded CPU as well as analog control. Parallel operation (up to 6 units)*2 and synchronized operation features are employed to allow extended output current. The PAV series is equipped standard with USB, RS232C and RS485 as communication interfaces which are essential for system upgrades. LAN*3 interface is also available as an option. A harmonic current control circuit is embedded with a power factor of 0.99 to take power environment into account.

Get Help