Filter Results By:

Products

Applications

Manufacturers

Control

Known value


Showing product results. 1756 - 1770 of 6959 products found.

  • VME PWM Servo Motor Driver / Amplifier Board

    64PW2 - North Atlantic Industries

    NAI’s 64PW2 is a 6U VME Servo Motor Driver/Amplifier Board featuring a dual, four-quadrant, bi-directional, PWM servo amplifier. Specifically targeted for DC servo motor applications, this board has an amplified power stage that uses a Pulse Width Modulation (PWM) control signal to provide motor control for both brush and brushless motors. Each motor drive accepts a 65 VDC power input and provides a 5 Amp maximum continuous current output (8.5 Amp peak).

  • Test bench for Diagnostics of Brake Valipers

    MS300 - MSG Equipment

    Diagnostic equipment MS300 for repair and diagnostics of brake calipers. MS300 is manufactured fromanti-corrosion materials resistant to chemical effects of the brake fluid. The tabletop and the control panel are made of stainless steel, itensuresa long-lasting service of the equipment. A pressure indicator andhigh-pressure pumpcontrol elements are located on the control panel. There is also aconnection coupling fortested units. There is a gutter along the tabletops perimeter preventing the brake fluid from draining on the floor. For convenient use of tools, there is a section with perforation on the back side.

  • 4 2/3 Digital Potentiometer Meter

    CS2-PM - Chuan Sheng Electronics Co., Ltd.

    CS2-PM Potentiometer Indicator has been designed with high accuracy measurement, display and communication of Ohm (3 wire) as like as Positioner.The meter supports Field Calibration function. It can be calibrated with sensor (Potentiometer) to meet machinery structure.They are also building in 4 Relay outputs, 3 External Control Inputs, 1 Analogue output and 1 RS485(Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission and communication for a wide range of machinery and testing equipments applications.

  • Digital I/O PXI Card

    GX5290 - Terotest Systems Ltd.

    The GX5290 Series are a high performance, cost-effective 3U PXI dynamic digital I/O boards offering 32 TTL or LVDS input or output channels with dynamic direction control. The GX5290 Series also supports deep pattern memory by offering 256 MB of on-board vector memory with dynamic per pin direction control and with test rates up to 200 MHz. The single board design supports both master and slave functionality without the use of add-on modules.

  • (100×130×19mm) C-Band DWDM FGA Full Function Module Fixed Gain EDFA Module

    FGA4400-FM04 - Hangzhou Huatai Optic Tech. Co., Ltd.

    Huatai FGA4400-FM04 series is a fixed gain Full Functional EDFA module which is specifically designed for C-Band DWDM optic transmission system, accord with various communication technology requirements of 44 channels DWDM system. It adopts nowadays excellent optical performance, advanced electronic control technology and complete software functionalities. Excellent total integration electronic transient control technology ensures amplifier to achieve the locking of optimal flat gain (OFG) in large dynamic input optical power range.

  • (125×150×20mm) C-Band DWDM FGA Full Function Module Fixed Gain EDFA Module

    FGA4400-FM05 - Hangzhou Huatai Optic Tech. Co., Ltd.

    Huatai FGA4400-FM05 series is a fixed gain Full Functional EDFA module which is specifically designed for C-Band DWDM optic transmission system, accord with various communication technology requirements of 44 channels DWDM system. It adopts nowadays excellent optical performance, advanced electronic control technology and complete software functionalities. Excellent total integration electronic transient control technology ensures amplifier to achieve the locking of optimal flat gain (OFG) in large dynamic input optical power range.

  • (70×90×15mm) C-Band DWDM FGA Full Function Module Fixed Gain EDFA Module

    FGA4400-FM02 - Hangzhou Huatai Optic Tech. Co., Ltd.

    Huatai FGA4400-FM02 series is a fixed gain Full Functional EDFA module which is specifically designed for C-Band DWDM optic transmission system, accord with various communication technology requirements of 44 channels DWDM system. It adopts nowadays excellent optical performance, advanced electronic control technology and complete software functionalities. Excellent total integration electronic transient control technology ensures amplifier to achieve the locking of optimal flat gain (OFG) in large dynamic input optical power range.

  • Air Shipment Milligauss Meter

    Oersted Meter - Alpha Lab, Inc.

    The Air Shipment Milligauss Meter has been designed so that one person alone can be the tester, and do repackaging, if necessary, without moving from the area. The remote sensor, shown on the right side, is connected through a 15-foot cable to the control box (left). This control box is placed next to both the package and the tester (person) so the tester can manually rotate the shipment. The remote sensor is placed either 15 feet or 7 feet away, depending on which test is being done.

  • Automotive Power Supply Immunity Test System

    SKS-3750 - Shanghai Sanki Electronic Industries Co., Ltd.

    The automotive power supply immunity test system is operated by the 7-inch touch screen front panel, and the 485 host can control multiple slave devices; EUT voltage and current real-time display and compensation function; waveform P1, P2a and P3 combined integrated equipment ; new ISO7637-2.2011 The standard and the standard of many car manufacturers; Ethernet interface, can use the upper computer software to control the waveform output; Built-in 50V/30A coupling decoupling network, the network has a higher capacity of 60A.

  • Bench Power Supply, Single, Adjustable, 1 Output, 0 V, 40 V, 0 A, 5 A

    72-7295 - Tenma

    The 72-7295 is a 40VDC Laboratory Grade Switching DC Power Supply with precision coarse and fine output voltage and current limiting controls. The output Overvoltage protection protects voltage sensitive load by instantly shutting down the supply when the output voltage goes beyond the set voltage due o line surge or otherwise. Current limiting control with automatic cross over of constant voltage and constant current modes makes this unit ideal for R&D work in laboratory situations.

  • Bench-top Stabilized Laser Source

    JW8001 - Shanghai Joinwit optoelectronic Tech,co.,Ltd

    JW8001 Bench-top stabilized laser source can satisfy the multiple needs of customers and achieve single wavelength output through unique automatic power control (APC) technology, automatic temperature control (ATC) technology and high stability output power and wavelength stability. It is an ideal instrument for scientific research and production, which requires a large range of attenuation variation, stable power and wavelength. It is widely used in the fields of scientific research, production and Engineering of optical communication, transmission and optical fiber sensing.

  • Compact Range Systems

    NSI-MI Technologies

    Compact range reflector-based systems offer users all the advantages of far-field configurations but with the convenience of environmental and security control. For indoor, far-field testing of a 3 foot diameter, 10 GHz antenna, the separation distance would need to be nearly 200 feet. A compact range can reduce this distance to under 20 feet. The ability to control temperature, eliminate wind deflections, avoid rain and snow as well as reduce maintenance costs are other day-to-day advantages of this product arrangement.

  • Digital Gauge Pressure

    ZET 7012-I VER.2 - ZETLAB Company

    Digital gauge pressure ZET 7012-I VER.2 is used in automated control systems and technological processes control systems in various industrial spheres:*oil and gas industry;*metallurgical industry;*energy industry;*construction engineering sector;*construction industry;*food manufacturing industry;*communal services and water supply industry;*automobile transport and shipping facilities.The digital gauge pressure is used for fast measuring of pressure and transfer of the data obtained in digital format via RS-485 or 4-20 mA interface .

  • Altitude Chambers

    Cincinnati Sub-Zero Products

    Our Altitude Chambers combine temperature and altitude with optional humidity to test basic components or subassemblies designed for use in a variety of industries. With a CSZ altitude chambers, you can control the temperature environment for testing while simulating various altitudes from site level to 65,000 feet (42 Torr). Altitude testing may be continued without temperature control up to 200,000 feet (.169 Torr). This same chamber may also be used as a temperature/humidity cycling chamber at site level only.

  • Software

    DataPRO  - DTS, Inc.

    DataPRO is a powerful set-up, control and data viewing software including ISO MME support. The modern user interface is designed to help test engineers create, control and manage every aspect of a test. DataPRO can be installed with an SQL server database and configured with individual user logins and access levels to support facilities and users of all sizes and capabilities. DataPRO works with all SLICE, TDAS G5 and TDAS PRO hardware and is required for systems using SLICE PRO TOM, DIM or TDM modules.

Get Help