Filter Results By:

Products

Applications

Manufacturers

Control

Known value


Showing recent results 1636 - 1650 of 6817 products found.

  • 10MHz Multi-Waveform Signal Generator

    Model MSG10M - Aplab Limited

    - Sine, Triangle, Square Output Waveforms- Easy Control of Generator Frequency- Frequency Readout in Hz, KHz, MHz- Output Attenuation upto 40dB- Low Cost

  • High Voltage Pulse

    SPY Inspection Equipment

    For thicker coatings it has fully adjustable output voltage from 5 kilovolt to 25 kilovolts. For very demanding conditions, a sensitivity switch offers additional control.

  • Trace Analyzer

    SPARK - Tiger Optics llc

    The Spark analyzer with powerful advanced CRDS spectroscopy is available at a popular price for a host of applications, from process control to quality and safety assurance in Air Separation Plants.

  • Trailer Wire Plug Tester

    767943 - Wesbar

    Plug these testers into any car connector and you will have an instant test of running light circuits. Features LED display to show completed circuit for the running lights left turn signal and right turn signal. Auxiliary and electric brake circuit are included on the 6-way tester and auxiliary, electric brake and battery charge are included with the 7-way tester. One piece units with internal ground. Proper installation and set-up of a brake control, when a trailer is not readily available, is possible with the 7-way tester. Current Monitor testing device is designed to assist in determining whether a tow vehicle's 7-way blade car end connector has been wired properly. (Current Monitor is an excellent diagnostic tool for installation, setup and troubleshooting of electric trailer brake controls.) The Trailer Tester is designed to help you quickly identify problems in the wiring of the trailer. This is done by testing the Left Turn, Right Turn, Tail/Marker, Brake and Back Up circuits on the trailer. The tester indicates approximate amount of current in each circuit (i.e. trailer battery). Brake Control Bench Tester is a test device designed to determine if a brake control is working properly. Checks brake control output, independent of vehicle wiring. Simulates many fault conditions including open ground, short circuit, open load and more.

  • 0.1Hz-2MHz AM/FM Functional Generator

    MFG-8202 - MCH Instruments Co.,Ltd.

    Features:• Low distortion, high stability• Linear and logarithmic sweep function• Sweep time and width adjustable• External Voltage Control Frequency (VCF)• Internal & external modulation (AM/FM) with modulation control• Output signal compatible with TTL/CMOS• Seven types of waveforms such as sine, square, triangle and ramp• 5W power output (ONLY for model no with “B”)• DC offset and 40bD attenuation can be applied to main output signal• Built-in frequency meter 0.1Hz~30MHz

  • 0.1Hz-5MHz AM/FM Functional Generator

    MFG-8205 - MCH Instruments Co.,Ltd.

    Features:• Low distortion, high stability• Linear and logarithmic sweep function• Sweep time and width adjustable• External Voltage Control Frequency (VCF)• Internal & external modulation (AM/FM) with modulation control• Output signal compatible with TTL/CMOS• Seven types of waveforms such as sine, square, triangle and ramp• 5W power output (ONLY for model no with “B”)• DC offset and 40bD attenuation can be applied to main output signal• Built-in frequency meter 0.1Hz~30MHz

  • Datalogger IO-Expander

    IOX-370 - HORIBA, Ltd.

    The I/O Expander takes as a central component of Immission measuring station the calculation of averages, controlling function controls and saving data. The raw data are analog, serial or read in via Ethernet. Automatically when certain events occur, a message by SMS or e-mail will be sent. The transmission of measurement data in the control center is via a modem or network. For configuration and visualization software IOVIS Lite is included. Furthermore, the stored values can requested with the integrated Web interface from any browser.

  • 5 VDC to 30 VDC, 8-Channel (Sourcing Output), 2 kHz C Series Digital Module

    NI-9470 / 787089-01 - NI

    5 VDC to 30 VDC, 8-Channel (Sourcing Output), 2 kHz C Series Digital Module - The NI‑9470 is a digital output module that features proportional valve drive control. You can use the NI-9470 to perform pulse width modulation (PWM), dither control, and current readback. The NI‑9470 … features eight output channels compatible with signals from 5 V to 30 V and transient overvoltage protection between the output channels and the backplane.

  • 5 VDC to 30 VDC, 8-Channel (Sourcing Output), 2 kHz C Series Digital Module

    NI-9470 / 787089-02 - NI

    5 VDC to 30 VDC, 8-Channel (Sourcing Output), 2 kHz C Series Digital Module - The NI‑9470 is a digital output module that features proportional valve drive control. You can use the NI-9470 to perform pulse width modulation (PWM), dither control, and current readback. The NI‑9470 … features eight output channels compatible with signals from 5 V to 30 V and transient overvoltage protection between the output channels and the backplane.

  • AC/DC DIGITAL HIPOTS

    B-1023-G - ROSS ENGINEERING CORPORATION

    Ross Engineering Corporation’s Hipot Control Unit features Variable Voltage Control with safety return to zero. It provides adjustable current overload trip 3½ and or 4½ digit digital meters for easy viewing. Its simplified design is excellent for testing and accurately calibrating high voltage instrumentation or measuring insulation leakage current, and testing breakdown or withstand voltage for any type of device where Hipot testing is appropriate within its current limit.

  • Amplifiers

    Motion Control Systems, Inc.

    Motion Control Systems'' linear amplifiers are high performance servo controllers that produce very smooth sinusoidal motor currents using a linear amplifier output stage. In combination with a sinusoidally wound MCS brushless motor, the linear amplifier can achieve extremely precise rotational control with less than 1% torque ripple, no acoustic noise and almost undetectable levels of electromagnetic interference. Standard programmable features allow greater design flexibility, easy installation and start-up.

  • Bioreactor Gas Analyzer

    MAX300-BIO - Extrel CMS, LLC

    Mass Spectrometry is a powerful tool for bioreactor monitoring. Changes to the composition of bioreactor or fermentor off-gas provide crucial insight into cellular health and production efficiency. This makes the fast, accurate analysis of CO2, O2, N2, Ar, H2O and other compounds essential for real-time process control. The MAX300-BIO uses cutting edge quadrupole mass spectrometer technology to quantify bioreactor gases from multiple reactors within the facility and reports the data to the control system in real-time.

  • Breadboard to DAQ Converters

    0001026-1 / -2 - VI Control Systems Ltd.

    VI Control Systems has designed two converter boards that make it easy to connect data acquisition boards to breadboards and allow easy computer control and monitoring of prototyped electronic circuits.  The converter boards are 0.8 x 3.5 inches and have silk-screened pin numbers for every pin on the board.  The 68-pin SCSI converter can also be used to connect 68-pin SCSI cables to prototype solder boards that have 0.1 inch centers.

  • C Series Functional Safety Module

    NI

    The C Series Functional Safety Module offers SIL 3 certification, according to IEC 61508. The safety logic solver resides inside the module, and you can program it with the included Functional Safety Editor software. The module contains built-in diagnostics that can monitor the status of the hardware and the integrity of the connections. You can use these modules to control critical safety functions in manufacturing assembly and test cells, large physical tests, condition monitoring applications, and process monitoring and control.

  • Digital I/O PXI Express Card

    GX5292e - Terotest Systems Ltd.

    The GX5292e is a high performance, cost-effective 3U PXI Express dynamic digital I/O boards offering 32 TTL or LVDS input or output channels with dynamic direction control. The GX5292e also supports deep pattern memory by offering 256 MB of on-board vector memory with dynamic per pin direction control and with test rates up to 100 MHz. The single board design supports both master and slave functionality without the use of add-on modules.

Get Help