Filter Results By:

Products

Applications

Manufacturers

Showing recent results 886 - 900 of 974 products found.

  • Serial, RS485/RS422 GPIB Instrument Control Device

    GPIB-RS485 / 779733-02 - NI

    Serial, RS485/RS422 GPIB Instrument Control Device - The GPIB‑RS485 is an IEEE 488 controller device for PCs with RS485 or RS422 ports. You can use this device to integrate an instrument into your system using GPIB. This device transforms a computer with an RS485 or RS422 … serial port into a talker, listener, or controller on the GPIB bus. It can also interface RS485 and RS422 instruments and peripherals to the GPIB bus. It can implement the physical and electrical specifications of the IEEE 488, RS485, and RS422 standards, as well as interpret and execute high-level commands from the serial port, including serial‑to‑GPIB, and GPIB‑to‑serial protocol conversions. This device is IEEE 488.2 compatible. The device includes a license for the NI‑488.2 driver software, providing maximum reliability for connecting to third-party instruments with GPIB.

  • Serial, RS485/RS422 GPIB Instrument Control Device

    GPIB-RS485 / 779733-01 - NI

    Serial, RS485/RS422 GPIB Instrument Control Device - The GPIB‑RS485 is an IEEE 488 controller device for PCs with RS485 or RS422 ports. You can use this device to integrate an instrument into your system using GPIB. This device transforms a computer with an RS485 or RS422 … serial port into a talker, listener, or controller on the GPIB bus. It can also interface RS485 and RS422 instruments and peripherals to the GPIB bus. It can implement the physical and electrical specifications of the IEEE 488, RS485, and RS422 standards, as well as interpret and execute high-level commands from the serial port, including serial‑to‑GPIB, and GPIB‑to‑serial protocol conversions. This device is IEEE 488.2 compatible. The device includes a license for the NI‑488.2 driver software, providing maximum reliability for connecting to third-party instruments with GPIB.

  • Super Fast Universal ISP Programmer

    48Pro2 - Dataman, Inc

    The Dataman 48Pro2 is a super fast PC based universal 48-pin programmer with ISP capabilities and USB 2.0 / parallel connectivity • Up to 75% faster programming of high-capacity memory devices • Over 105,000 devices supported with new devices added monthly • Intelligent pin drivers operate down to 1.8V so you'll be ready to program the full range of advanced low-voltage devices • Full ISP capabilities including JTAG compatibility • Hi-speed USB 2.0 connectivity • Easy to use software compatible with the latest operating systems including Windows 10 • Multiprogramming support allows one PC to control up to four units programming independently or as a gang programmer • Comprehensive 3 years parts and labor warranty

  • Test Bench for AC Compressors

    MS111 - MSG Equipment

    The test bench is intended to test AC compressors of wide range of vehicles on R134a refrigerant. The equipment detects failures of a vehicle unit before its mounting in a car, whether it is a remanufactured, repaired unit or a used one. In the process of testing, data is shown on LCD display. It gives an opportunity to follow testing results realtime, save and/or print them due to software special features. Unit fixation mechanism is very flexible: a compressor can be easily fixed, no matter what kind of fittings it has. Units with electromagnetic clutch or electromagnetic valve can be tested both separately and simultaneously. Peculiar features of electric commutation are considered, connection polarity is identified automatically, indicator on the control panel indicates on presence of a diode in a circuit.

  • Scanning NV Magnetometry

    ProteusQ - HORIBA, Ltd.

    Qnami ProteusQ is a complete quantum microscope system developed on HORIBA AFM technology. It is the first scanning NV (nitrogen-vacancy) microscope for the analysis of magnetic materials at the atomic scale. The Qnami ProteusQ system comes with state-of-the-art electronics, software and AFM optical platform. Its flexible design allows for future adjustments and scaling, expansion and capability upgrades. The proprietary Qnami ProteusQ quantum technology provides high precision images for you to see directly the most subtle properties of your samples and the effect of microscopic changes in your design or fabrication process. The Qnami ProteusQ opens a new window on your research and gives you a new level of control to drive innovation in the design, creation and delivery of smart and energy-efficient electronics.

  • New Optic Fiber Ranger

    ST-33041 - Wuhan Sunma Technologies Co., Ltd.

    We make full use of OTDR work principle to design and develop the ST-33041 fiber ranger and greatly improve the performance from outside design to inside functions.In hardware, it is lightweight, rugged, dustproof and waterproof; in software, it has three brilliant functions. One is Automatic Power Control, which automatically test and adjust the best power level according to the real test environment; second is Automatic Pulse Width Selection which automatically select most suitable pulse width according to the real test distance. Third, it has built-in 650nm VFL, with which it can detect the fault from 1-15km and finally realize the one-dead zone test over the full range.All these functions make the test easier and more accurate.

  • Software

    Hole Shot - Mustang Dynamometer

    The modern world is changing faster than ever before and most companies and governments are migrating away from older Windows based networking technologies to web-based networks that are endlessly interconnected making information easier to share and easier to access from any device at any time. Mustang adopted web-based technology in 2016 when it embarked on a new project to advance dynamometer technology and simplify its offerings. Mustang’s goal was to increase commonality and provide customers with a more powerful and easier to manage controls package. Mustang already offered a full menu of testing capabilities, so we turned our attention to increasing access and decreasing clutter. By adopting web-based systems, Mustang can better service thousands of customers world-wide from one location and keep all of our customers on the most up to date system available. All enhancements can be pushed to all of our customers at the same time making sure all installations are up to date. Our latest controls package, Hole Shot™ Software is designed to keep our customers constantly ahead of the curve and ensure that their valuable data is secure and backed up to a secured cloud database.

  • High Resolution MWIR Camera Modules

    Neutrino® Performance Series - Teledyne FLIR

    The performance series includes the FLIR Neutrino QX and SX12. Neutrino SX12 is a 1280×1024/12 µm resolution focal plane array (FPA) and has a frame rate of 120 Hz at 720P and >60 Hz for SXGA. Neutrino QX is a 2048×1536/10 µm FPA and has a frame rate of 60 Hz at 1080P and >30 Hz for QXGA. Neutrino Performance Series is ideal for ground or airborne intelligence, surveillance and reconnaissance (ISR), targeting, counter-UAS solutions and Wide Area Motion Imagery (WAMI) applications. The industry-standard interfaces, simple and powerful software controls, complete product documentation and Teledyne FLIR technical support reduces product development risk and shortens time to market. The Neutrino is an OEM camera module that is intended to be integrated into a higher level system.

  • 8 AI (16-Bit, 3.5 MS/s/ch), 2 AO, 24 DIO, Multifunction I/O Device

    PCIe-6376 / 785809-01 - NI

    8 AI (16-Bit, 3.5 MS/s/ch), 2 AO, 24 DIO, Multifunction I/O Device - The PCIe‑6376 is a simultaneous sampling, multifunction DAQ device. It offers analog I/O, digital I/O, four 32‑bit counters, and analog and digital triggering. Onboard NI‑STC3 timing and synchronization technology … delivers advanced timing functionality, including independent analog and digital timing engines and retriggerable measurement tasks. The PCIe‑6376 is ideal for a variety of applications, such as IF digitization; transient recording; ISDN, ADSL, and POTS manufacturing test in the telecom industry; ultrasound and sonar testing; and high-energy physics. The included DAQExpress™ companion software provides basic measurement and analysis, while the NI‑DAQmx driver provides the ability to create customized automated measurement and control applications.

  • Automated Compliance and Device Characterization Tests

    N5990A - Keysight Technologies

    The Keysight N5990A test automation software platform is the most powerful tool for serial and multi-lane gigabit testing. It is the unique universal platform for testing a wide range of digital buses such as PCI Express, USB, HDMI or MIPI. The same graphical user interface and operating principles are used for all applications. This boosts productivity, especially when testing devices which support multiple digital buses. The N5990A can be tailored to your individual test needs with the flexible test sequenzer and controls all instruments needed for your tests. The configurable database interface of the N5990A test automation platform enables the convenient storage of all test results. A web interface allows an effective and easy operation. Custom calibration and test procedures can be implemented easily with User Programming.

  • CPV LED Thermal Resistance Test System

    TRT series - SW Link Ltd

    TRT LED Thermal Resistance Test system is specially designed and optimised for high power, high brightness LEDs applications in accordance with JEDEC standard. It measures the junction temperature and thermal/real resistance of LEDs. By fully integrated heating source measuring and control circuits together, the TRT system has achieved high performance, high accuracy, but with much low cost. It makes the thermal measurement accessible for every LEDs device makers and light designers. Users can also select different software package from just measure the junction temperature to full transient analysis.In case of HP LEDs, there is nearly half of electrical power need to be dissipated to air as heat to keep the LEDs cool. The junction temperature of LEDs is depending on the package of the LEDs, head sink, as well where the LEDs devices are installed.

  • Curved Needle 5900 Test Systems

    Instron

    The Instron® Curved Needle Testing System is built on the 5900 system platform and is ideally suited for needles used in abdominal, fistula, vascular, intestinal, or other surgical procedures. This system provides two different needle testing solutions: one for curved needle puncture testing and one for bend testing. The curved needle puncture testing fixture is used to evaluate needle sharpness and insertion force, while the needle bend testing fixture is used to evaluate flexural properties of the needle during use. With its tabletop design, the Curved Needle Testing System has a small footprint and takes up minimal bench-top space. The testing system operates with Instron Bluehill® Universal software that provides test control, data acquisition, test results, and reports, as well as a large library of calculations.

  • DSP Mixers

    iFlex Mixers - Ivie Technologies

    The iFlex line of DSP mixers just got a whole lot bigger (and better). With the addition of the Modular Audio Platform (MAP) series to the iFlex mixer line, there are now over 16 new fixed architecture mixers, and an almost limitless number of user-selectable modular configurations, all using the SonataTM software for programming and control. iFlex mixers can now be configured with 4 channel module cards such as mic/line input, line output, dual I/O, AEC line output, AES input, AES output, and FIR DSP line output, as well as telephony, logic I/O, and relay modules. Any MAP mixer will accept any MAP module, in any configuration. This means that even a small channel count system can now have an impressive level of performance (such as AEC, or FIR DSP) at an equally impressive price.

  • Four Channel Load Cell Tester

    LCIC-4HS - Industrial Measurement Systems Ltd.

    Four Channel Load Cell Interface Card Model LCIC-4HS The LCIC-4HS is a four channel load-cell interface board for the IBM PC/AT and compatible computers (ISA Bus). This board was especially designed to fit very fast and real-time weighing applications such as multi-head fillers. It supports up to four channels with one load-cell on each. All the necessary filters and the batching control functions are built on the board and are easily accessible by the user. Direct communication with the PC bus and high-frequency sampling enables the LCIC-4HS to handle all real-time applications and to achieve very high accuracy. The LCIC-4HS is memory-mapped. Up to 32 boards (128 channels) may be installed in a single PC. It comes with a detailed user manual and software utilities for easy installation and calibration as well as full examples for the programmer (including Win 95/98 drivers).

  • Machine Vision Camera - 0.4 MP, 291 FPS, Sony IMX287, Color

    Blackfly S GigE - Teledyne FLIR

    The Blackfly® S leverages the industry’s most advanced sensors in an ice-cube form factor. It is packed with powerful features enabling you to easily produce the exact images you need and accelerate your application development. This includes both automatic and precise manual control over image capture and on-camera pre-processing. On-camera features including IEEE1588 clock synchronization and full compatibility with popular third-party software supporting GigE Vision, gives system designers the tools to quickly develop innovative solutions. GigE models featuring Lossless Compression (LLC) are also available with higher maximum frame rates and lower bandwidth requirements, helping maximize output without compromising image quality. The Blackfly S is available in GigE, USB3, cased, and board-level versions.

Get Help