Teledyne Relays
Teledyne Relays is Everywhereyoulook™, providing switching solutions for aviation, test & measurement equipment, industrial control, and military & space applications. With bandwidths from DC - 18GHz and signal integrity up to 40Gbps, Teledyne’s ultraminiature surface-mountable relays are perfect for high frequency and high throughput applications. Teledyne Relays offers industrial solid state relays for precise heating, lighting and motor control. For extreme environments and integration into ultraquality military systems, Teledyne offers military solid state relays.
- 800-284-7007
- 323-241-1287
- relays@teledyne.com
- 12525 Daphne Avenue,
Hawthorne, Californa 90250-3384
United States
Filter Results By:
Products
Applications
-
product
Three-Phase Solid State Relay
Series E3P2G
The E3P2G series, three-phase solid state relay is the 2nd generation of the discontinued E3P series. The new design incorporates a high efficiency back-to-back thyristor with direct copper bonding for a longer lifetime expectancy. Over-Voltage protection is provided internally with TVS diodes for the input and output. Additionally our -16 model is designed with an RC snubber and VDR for greater protection to the output to handle all types of loads. The industrial SSR utilizes optical isolation to protect the control from load transients for each phase and has tight zero-cross window for low EMI. A control status LED are standard on all models.
-
product
Three-Phase AC Solid-State Relay
Series DR2C & DR3C
The DR2C & DR3C series is intended to replace mechanical contactors especially for high duty cycle applications. Package width ranges from 54 mm (3xDIN) and goes up to 70 mm with 2-pole and 3-pole switching options available, provided with an integrated heatsink and designed for DIN rail mounting. Apart from resistive and slightly inductive loads, this series is certified for motor switching with associated motor ratings. A green LED status indicates a control voltage presence.
-
product
Industrial Single-Phase Relay With Antiparallel Thyristor Output
Series SHC
The SHC industrial, Single-Phase Relay with antiparallel thyristor output is the most widely used industrial SSR due to its multiple application possibilities. The relay can be used for resistive, inductive and capacitive loads offering both Zero-Cross and Random switching. The built-in varistor secures transient protection for the heavy industrial applications, and the LED indicates the status of the control input. The clip-on cover is securing touch protection to IP20 .
-
product
DC Output Industrial Solid-State Relay For Fast Switching Response Times
The SHCDC is a DC output Industrial Solid-State Relay ideal for applications where fast switching response times are critical. It is well-suited for applications requiring a high number of switching cycles, as its lifetime is not affected by frequent switching. It can be mounted on a panel or heatsink and is controlled by a DC voltage ranging from 4 to 32 V and includes an LED status output to indicate the presence of control voltage on the SSR.
-
product
Phase Angle Controller
Series SHP
The Series SHP phase-angle controller provides analog switching. It features an internal microcontroller and overvoltage protection. Choose relays with either removable input spring connectors or IP20 touch-proof flaps. The relays are designed in conformity with EN60947-4-3 (IEC947-4-3)and EN60950/VDE0805 (Reinforced Insulation), and feature Phase Angle switching.Available options include:SHP24N50R 50A, 9-280Vac, 600Vpeak Load; 4-20mA Control
-
product
Single-Phase AC Relay With Antiparallel Thyristor
Series STHC
The STHC is a Single-Phase AC relay with antiparallel thyristor output stands as a cornerstone in industrial applications, accommodating resistive, inductive, and capacitive loads. Safety measures are paramount, and this relay integrates a built-in snubber for transient protection, LED indicator for the control input for users can monitor its status with ease, and IP20 clip-on cover for touch protection.
-
product
Relay Switch For Medium- To High-Power DC Loads
S20DC100
Series S20 relays switch medium- to high-power DC loads. These devices feature the latest-generation MOSFET technology as well as an innovative isolated driver to ensure fast power turn on and off. The relays feature triggered control input to avoid linear control risks and fast switching times. The relays also offer an LED for status.
-
product
Compact Solid State Switching Solution For Confined Spaces
Series FSC
The FSC series provides a compact solid state switching solution suited for confined spaces and is suitable for resistive loads. Integrated transils provide protection against overvoltage and a green LED indicates presence of the control voltage. FASTON terminals for quick installation and with pre-attached thermal interface ready for mounting on chassis or heatsink.
-
product
Ready-To-Use Industrial Solid-State Relay
Series DRSC
The DRSC is a ready-to-use Industrial Solid-State Relay that is provided with an integrated heatsink and designed for DIN rail mounting. The smallest footprint occupies only a width of 22.5 mm with ratings up to 30 A. The DRSC output is protected against overvoltage by means of an integrated varistor. Control ON indication is provided through a green LED.
-
product
Latching (Terminated) SP3T, SP4T, or SP6T Multi-Throw Switch, 50Ω Impedance, SMA Connectors
Part No.s CCT-39S/CT-39S SP3T/ SP4T/ SP6T
Latching, SP3T, SP4T, or SP6T Multi-Throw switch, 50Ω impedance. Includes internal 50Ω terminations on unused portsAvailable in Commercial and Elite models, with SMA connectorsDC-18GHz (commercial) DC-22GHz (Elite)
-
product
Dual-Output 100 VDC Plastic Relay
Part No. LPBD100
The LPBD100 is a dual-output 100 Vdc plastic relay. The relay output-switch contacts are normally closed and will conduct the load current until a voltage is applied to the relay input. With 4 volts or more at the relay input, the output-switch contacts open and the relay no longer conducts. The LPBD100 assembly contains two independent, completely isolated relays.MSL 6 Available options include:LPBD100 0.25Adc, 100Vdc Load; 4-7Vdc Control;
-
product
Centigrid Hermetically Sealed Package, SMT-J Mounted, Non-Latching DPDT
Part No. S134
Centigrid hermetically sealed package, SMT-J mounted, non-latching DPDTAvailable options include:S134D - coil transient suppression diodeS134DD - coil transient suppression diode, and reverse polarity protection diodeResistive: 1 Amp/28Vdc Inductive: 200 mA/28Vdc (320 mH) Lamp: 100 mA/28Vdc
-
product
Latching/Failsafe, SPDT, 50Ω Impedance, SMA Connectors
Part No.s CCR-33S/CR-33S
Latching/Failsafe, SPDT, 50Ω impedanceAvailable in Commercial and Elite models, with SMA connectors.DC-18GHz (commercial - CCR) DC-22GHz (Elite - CR)
-
product
6 GHz Non-Latching DPDT
Part No.s GRF100, GRF103
Centigrid hermetically sealed package, SMT straight-lead mounted, non-latching DPDT, with high insertion loss repeatability Bandwidth: DC - 6GHzAvailable options include:GRF103 - low power coil
-
Parent
-
Teledyne Defense Electronics
From advanced RF/Microwave systems to Hi-Voltage Interconnects & Components to comprehensive Space-qualified offerings and aerospace materials, our portfolio is sought after by technology leaders large and small worldwide. Leveraging the capabilities and the unique breadth of our many leading Teledyne Defense Electronics brands, we engineer solutions to meet your most complex specifications.
-
Teledyne Technologies Incorporated
Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.
Siblings
-
Teledyne RF & Microwave (Obsolete)
Teledyne RF & Microwave has more than 50 years experience in the design, development, and manufacture of sophisticated components and integrated microwave assemblies optimized for the most demanding applications and harshest operating environments, from deep sea to space.
Siblings
-
Teledyne RF & Microwave
Teledyne RF & Microwave Solutions (RF&M) has over 50 years of experience in the design, development, and manufacture of sophisticated microwave/RF components and integrated assemblies for the most demanding challenges. Our products are sought after by civilian and military organizations spanning numerous markets, including Aviation, Communication, Electronic Warfare (EW/ECM/CIED), Industrial, Missile/UAV, Radar, Satcom, Space, and Test and Measurement. Our product portfolio is one of the most comprehensive RF/MW product lines in the world.
Siblings
-
Teledyne Storm Microwave
Teledyne Storm Microwave has been providing high-quality interconnect products and cable assemblies to domestic and international defense, space and telecom markets since 1978.
Siblings
-
Teledyne CML Composites
Teledyne CML Composites based in Bromborough England provides a comprehensive manufacturing service for composite products in advanced engineering applications, including components and assemblies for aircraft structures and systems.
Siblings
-
Teledyne Paradise Datacom
Teledyne Paradise Datacom, a division of Teledyne Defense Electronics, LLC, designs, manufactures and sells satellite modems, solid state power amplifiers (SSPA), block up converters (BUC) and associated redundancy subsystems. We deliver satellite communications products around the world.
